顯微硬度和機械特性

測試設備可精準測定從硬度極低到極高的材料特性,亦可做到微米至奈米級的塗層特性測定。

手冊 下載
FISCHERSCOPE ST200 Brochure ST200 [PDF]

表面輪廓測量

接觸式測量探頭,在塗裝製程之前精準測定表面輪廓。

手冊 下載
FPR1 Brochure MMS-PC2 [PDF]

校準與配件

搭配 Fischer 測量儀器使用的校準標準、儀表支架、軟體和配件,適用於塗鍍層厚度測量、材料分析、材料測試和奈米壓痕。

手冊 下載
DataCenter、DataCenter IP Brochure Datacenter [PDF]
技術參數表 下載
校準 TDS X-RAY Calibration Standards [PDF]
TR-Characterization of Cd primary and secondary reference materials [PDF]
TR-Characterization of Cr/Cu, Cr/CuSn and Cr/Fe reference materials [PDF]
TR-Characterization of Cr/Ni reference material [PDF]
TR-Characterization of Cu primary and secondary reference materials [PDF]
TR-Characterization of self-supporting Au foils and Au layers on mylar [PDF]
TR-On the Re-calibration of Au-Layer Master Reference Standards [PDF]
TR-On the re-calibration of Ni-foil reference standards [PDF]
TR-On the re-calibration of Pt-foil and Pt/Si Reference Standards [PDF]
TR-Primary reference standards for precious metal analysis (gold alloys) [PDF]
TR-On the re-calibration of Rh-foil reference standards [PDF]
TR-Re-calibration and characterization of Ti secondary reference standards [PDF]
TR-Re-calibration of self-supporting Cr foils with Cr/Fe reference standards [PDF]
TR-Re-check of Sn foils, self-supporting and mounted over Ni [PDF]
TR-Re-evaluation of Cr/Cu reference standards [PDF]
TR-Re-evaluation of Cr/Fe reference standards [PDF]
TR-Recertification of Au on Pd on Ni master standard foils [PDF]
TR-Recertification of master standards with Pd layers [PDF]
TR-Recertification of Zn and Zn/Fe secondary (“master”) reference standards [PDF]
TR-Traceability of mass per unit area and composition of ZnNi-coatings [PDF]
TR-Traceability of the amount of Phosphorus in NiP-coatings [PDF]

您的 FISCHER 聯絡人

Contact

菲希爾測試儀器有限公司/臺灣
臺北市/臺灣

直接聯繫
電話: +886 (2) 8797 5589
電子郵件: taiwan@helmutfischer.com
線上聯繫表格